MADGE ACCESS SWITCH ISDN |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
Madge Access Switch ISDN Network Simulation
|
Madge AccessSwitch ISDN Network Simulation A high-capacity, high-performance, network access and switching system. The Madge AccessSwitch™ is a high-capacity, high-performance, network access and switching system providing scalable and highly available solutions for companies that develop, manufacture and support products for the communications industry. Network interfaces include quad digital network interfaces for T1, ISDN Primary Rate, E1 Primary Rate; quad high-speed synchronous data modules that support inverse multiplexing(V.35, RS449, X.21); octal ISDN Basic Rate interfaces (U, ST) and H.320 Multipoint Control Units for video conferencing applications.
Overview
|
|||||||||||||||||||||||||||||||||||||||||||||||||
 |
Accelerating development efforts |
|
Improving test coverage for manufacturing |
|
Cost effective simulated networks for training and demonstration |
|
Up to 140 network interfaces |
|
Extensive protocol support |
|
Integral protocol analyze |
Features
Multiple Configuration.The Access Switch can be configured to perform many functions for companies that develop communications products such as modems, routers, general purpose transmission equipment, application specific switches and PBX's. The flexibility in the AccessSwitch hardware and AccessWare software provides the most cost effective solution for businesses that develop, manufacture and support products for the communications industry by:
|
accelerating development efforts |
|
improving test coverage for manufacturing |
|
providing simulated networks for training and demonstration. |
Full Routing and Switching Capabilities
Zero cost testing - no need to place calls from one carrier BRI/PRI to another.
The Access Switch provides dynamic call routing and port-to-port switching. The
switch provides multi-protocol, tandem switching between multiple ISDN and
robbed bit signaling protocols.
Built In Protocol
The protocol analyzer is built into the Access Switch management software which
allows users to trace and capture call activity. This powerful tool helps users
immediately monitor call setup (Q.931/Q.921), bandwidth and alarm conditions.
Comprehensive Management
The Access Switch may be configured in a centralized or distributed environment,
either locally or remotely through the AccessWare Management Console
application. The Local Management Console and Network Management Console
applications are easy to use, PC-based Microsoft Windows applications. These
applications provide a GUI based, intuitive interface to configure, reconfigure
and store multiple profiles as well as monitoring all network operations.
Scalable Architecture
The Model 200 and Model 60 are multi-slotted, chassis-based systems which can be
tailored to support varying application and test environments. The Model 200
supports a maximum of 140 network interfaces depending on type and bandwidth
requirements, while the Model 60 provides six slots for support of network
interfaces. Modules include quad digital network interfaces for T1, ISDN Primary
Rate, E1 Primary Rate; quad high-speed synchronous data modules that support
inverse multiplexing(V.35, RS449, X.21); octal ISDN Basic Rate interfaces (U,
ST) and H.320 Multipoint Control Units for video conferencing applications.
Key Benefits
Extensive Protocol SupportHighly flexible architecture that permits testing of terminal equipment to standard protocols in an emulated switched environment including upstream protocols as well as system clocking. This decreases development time by allowing engineering organizations to test EuroISDN products in US, while European Engineering organizations can test North American protocols in Europe. To facilitate varying test environments, multiple network pro-files can be created and stored by the management software for different test configurations.
Specifications
| Model 60 | Model 200 | |||
| Physical | Height: 159 mm. 6.25 in. Width: 445 mm. 17.5 in. Depth 406 mm. 16.0 in. Weight: 18 kg. 40 lbs. |
Height: 610 mm. 24.0 in. Width: 483 mm. 19.0 in. Depth: 495 mm. 19.5 in. Weight: 54 kg. 120 lbs. |
||
| Electrical Voltage: Frequency: Current: |
110/220 VAC 50/60 Hz 2A@115VAC, 1A@220VAC |
110/220 VAC 50/60 Hz 10A@115VAC, 5A@220VAC |
||
| Environmental Temperature: Humidity: Altitude: |
5 to 55° C, 40 to 130° F 20% to 80% Non-Condensing -60 to 3,000 meters, -200 to 10,000 ft. |
|||
| Safety and Emissions | Designed to meet all relevant sections of UL 1950 (Third Edition) UL 1459, CSA 22.2 No. 950-95, FCC Part 15 Class A. Designed to meet all relevant sections of EN60950, EN41003, and European EMC Directive 89/336/EEC. | |||
| Signaling Protocols | Over T1 Lucent 5ESS Lucent 4ESS NTI DMS100 NTI DMS250 E&M Master/Slave DPO/DOT Reverse Battery Fxo/FXS Loop Start Fxo/FXS Ground Start |
Over E1 EuroISDN (iCTR4) |
Over BRI Lucent 5ESS NTI DMS 100 EuroISDN (iCTR3) |
High Speed Serial Interfaces V.35/RS366 RS4449/RS366 V.35/V.25bis RS449/V.25bis X.21 |